Woods & Super Woods Buggy

Super Buggy

4 cyl. ONLY (can use a turbo on a stock engine up to 2000cc), Race Fuel Allowed OR Up to a 2.4, Must be stock, Any fuel system BUT must run pump fuel OR 2 valve per cyl. can be modified if under 2.0 liter, More than 2 valve per cyl. can be modified up to 2000cc BUT if over 1650cc you must run 28mm venturies in the carburetor OR No restrictions on air cooled motors

Any transmission

Any suspension

Vehicle must be minimum of 95″

Two wheel drive ONLY

Engine and transmission MUST be located behind driver

Diameter of tubing must be at least 1 1/2″ for main roll cage

Tubing must be .095″ thick

Limited Super Buggy

Vehicle must be minimum of 95″

Engine and transmission MUST be located behind driver

Air cooled motor

No restrictions

Stock water cooled motor

Compression limited to 150psi (may be asked to be tested)

Displacement 2.2 liter maximum up to 125 factory rated horsepower

Single carburetor or stock fuel injection

No eco-tech engines

No variable timing

Pump gas only -NO race fuel

No coil spring suspension or air shocks/suspension

1600 Buggy

Vehicle must be minimum of 95″

Engine and transmission MUST be located behind driver

Engine

Engine displacement limited to 1600cc maximum

Must be air cooled VW engine

Must use stock intake and carburetor

Superwoods Buggy

Vehicle must be minimum of 95″

Engine and transmission MUST be located behind driver

Must be a buggy intended for recreational use

Fuel cell recommended

Fuel tanks must be safe in design and mounting, safety committee has final ruling

Must have working break system

Chassis must be designed to adequately protect drive and/or passenger

No rebuildable shocks

Any engine

Any transmission

Any modifications to suspension (front or rear)

MUST have two seats

Woods Buggy

Vehicle must be minimum of 95″

Engine and transmission MUST be located behind driver

Must be a buggy intended for recreational use

Fuel cell recommended

Fuel tanks must be safe in design and mounting, safety committee has final ruling

Must have working break system

Chassis must be designed to adequately protect drive and/or passenger

No rebuildable shocks

Stock engine, including CAM

No case boring to increase bore size

Stock crank, stock intake, carburetors, heads, and valve size

NO race fuel

Any transmission

STOCK dimension suspension ONLY (front and rear)

MUST have two seats